You are looking for products in the category of “”.
Table of Contents
Recommended products regarding the topic “Passive Pa Subwoofer”
We have compared products in the section “Passive Pa Subwoofer”. Here you can find the top 16 in the category “Passive Pa Subwoofer”.
Passive Pa Subwoofer – the most important at a glance
If you’re in the market for a new subwoofer, you’ll want to consider a passive subwoofer. Passive subwoofers are an excellent choice for a number of reasons. First, they’re more affordable than their active counterparts. Second, passive subwoofers are easier to install. And third, passive subwoofers offer more flexibility in terms of placement.
There are a few things to keep in mind when shopping for a passive subwoofer. First, you’ll need to make sure that your receiver has enough power to drive the subwoofer. Second, you’ll need to decide whether you want a sealed or ported subwoofer. And finally, you’ll need to take into account the size of the subwoofer and the size of your room.
When it comes to power, passive subwoofers are typically powered by amplifiers that put out between 50 and 200 watts of power. So, if you’re looking for a subwoofer that can really thump, you’ll want to make sure that your receiver can put out at least 50 watts per channel.
There are two main types of subwoofers: sealed and ported. Sealed subwoofers are typically smaller and more compact, making them a good choice for smaller rooms. They’re also more efficient, meaning that they require less power to produce the same amount of bass as a ported subwoofer. Ported subwoofers, on the other hand, are typically larger and require more power to drive. However, they offer more bass than a sealed subwoofer.
When it comes to size, passive subwoofers come in a variety of sizes. The size of the subwoofer you’ll need will depend on the size of your room and how much bass you want. If you’re looking for a subwoofer that can really fill a large room, you’ll want to opt for a larger subwoofer. But, if you’re just looking for a little bit of extra bass, a smaller subwoofer will do the trick.
Now that you know a little bit more about passive subwoofers, you can start shopping for the perfect one for your needs. Just keep in mind the power requirements, the type of subwoofer, and the size of the room when making your decision.
Bestsellers in “Passive Pa Subwoofer”
A list of bestsellers under the category “Passive Pa Subwoofer” you can find here. Here you can see which products other users have bought especially often.
- DEEP BASS PERFORMANCE:- The Rockville SBG1158 features a 15-inch high-excursion woofer delivering 800W peak power for rich, room-filling bass ideal for DJ gigs, live concerts, and large venues.
- DURABLE MDF CONSTRUCTION:- Built with a rugged MDF cabinet, this subwoofer withstands heavy use while reducing resonance for clear sound, complete with a pole mount for easy speaker integration.
- VERSATILE CONNECTIVITY:- Dual XLR and 1/4-inch inputs ensure compatibility with powered mixers, amplifiers, and active speakers, making setup simple for professional audio applications.
- PRECISE AUDIO QUALITY:- A high-quality crossover filters frequencies (35Hz–200Hz) for clean, distortion-free bass, perfect for enhancing music at parties, clubs, or outdoor events.
- PORTABLE AND POWERFUL:- Weighing 44 lbs with ergonomic handles, this subwoofer balances portability and power, ideal for mobile DJs and event organizers needing reliable low-end sound.
- Passive, Non-Powered, Portable 18" Stage Subwoofer with 3" Voice Coil, and a Cast Frame.
- Power handling is rated at a robust 350 watts continuous, and 1400 peak. Impedance: 4 ohms, Inputs: 2 x SpeakON (parallel), Frequency Range: 34Hz-250Hz (-10dB), Frequency Response: 53Hz-250Hz (±3dB), Maximum Peak SPL: 133dB SPL.
- The rugged enclosure is constructed from 19 mm (.75 in) MDF using advanced adhesives and mechanical fastener technology for durability, minimal resonance, and improved low-frequency performance. The enclosure is covered in black carpet.
- A top mounted, cast aluminum 35 mm pole mount receptacle can receive an optional SS3BK pole to facilitate use of the JRX218S as a base for a mid/high speaker cabinet.
- Non-resonant steel handles for easy transport, without altering the sound.
- Height: 23.5", Width: 20.3", Depth: 22", Weight: 71 lbs.
- Exceptional sound quality, wide frequency bandwidth and dynamic range
- Ergonomically shaped handles for easy transport
- Pole socket for speaker mounting pole
- Precise reproduction of ultra-low frequencies with a clear, powerful punch
- Package Includes: (2) Rockville RSG15 3-Way 8-Ohm Passive DJ/Pro Audio PA Speakers Totaling 3000W. (2) Rockville SBG1158 Passive Pro DJ Subwoofers Totaling 1600W. (2) Rockville RSP20 20" Mounting Pole from Subwoofer to Speaker, Heavy Duty Steel. Features: Rockville RSG-15 Carpeted Passive Loudspeaker. Single 15 Pro Audio Woofer. (4) Piezo 3" Bullet Tweeters
- (1) High Efficiency Piezo Compression Horn. RMS Power: 750 Watts. Program Power: 1000 Watts. Peak Power: 1500 Watts. 2.5 High Temperature Aluminum Voice Coil. 8-Ohm Impedance. Sensitivity: 102dB @ 1w/1m. Frequency Response: 40Hz - 22 kHz. SpeakON Input connection. In/Out connections (Parallel). Dimensions: (20.5+13.2)x13.8x29.5in. Weight: 39.24Lbs. Pole Mountable. Rubber Isolating Feet
- Construction: Top quality MDF - Stapled, Bonded & Braced. Rockville SBG1158 15" 800 Watt Passive Pro DJ Subwoofer w/ MDF Cabinet and Pole Mountable. 15 Pro audio woofer. 400 Watts RMS / 600 Watts Program / 800 Watts Peak. 3 High temperature aluminum voice coil. 70 oz magnet woofer. Ported Enclosure for Improved Bass Response
- Construction: High-Density, High-Quality Non Resonant MDF wood - Stapled, Bonded & Braced. Ergonomic Recessed Handles. Molded Steel Grill. Aviation Grade Black Carpet. Pole Mountable. Rubber Isolating Feet. Binding Post / Banana Plug Terminals (Negative/Positive). 1/4" Jack (In/Out). SpeakON (In/Out). All input/output connections are internally connected in parallel. Nominal Impedance: 8 Ohm
- Sensitivity: 94dB @ 1w/1m. Frequency Response: 20Hz - 500Hz. Dimensions (W x D x H): 18 x 17 x 20. Weight: 44 lbs. Features of RSP20: Rockville RSP20 20 Mounting Pole from Subwoofer to PA Speaker. 200 Lb Load Capacity. 20" Mounting Pole. Pole diameter: 1.38" inches (35mm)
- Rockville SBG1188 18" 1000 Watt Passive Pro DJ Subwoofer w/ MDF Cabinet and Pole Mountable. 18 Pro audio woofer. Power Rating : Peak Power Handling : 2000 Watts (1000 Watts per Subwoofer)
- Program Power Handling : 750 Watts. RMS Power Handling : 1000 Watts (500 Watts per Subwoofer). 3 High temperature aluminum voice coil. 90 oz woofer magnet
- Dual Ported Enclosure for Improved Bass Response. Construction : High-Density, High-Quality Non Resonant Particleboard, Stapled, Bonded & Braced. Ergonomic Recessed Handles. Molded Steel Grill
- Aviation Grade Black Carpet. Pole Mount. Rubber Isolating Feet. Binding Post / Banana Plug Terminals (Negative/Positive). 1/4 Jack (In/Out). SpeakON (In/Out)
- All input/output connections are internally connected in parallel. Nominal Impedance : 8 Ohm. Sensitivity : 96dB @ 1w/1m. Frequency Response : 20Hz - 500Hz. Dimensions (W x D x H) : 23 x 18 x 26
- MASSIVE POWER: A professional-grade, powerful, roadworthy and affordable PA passive subwoofer with sturdy plywood enclosure; 800W RMS 1600W program power handling capability
- GREAT BASS PERFORMANCE: Dual 12“ driver subwoofer designed to deliver deep and punchy bass and extend the low frequency down to 38Hz
- POWER EFFICIENT: Folded horn design improves power efficiency and allows the sub to be built in a compact-size enclosure without compromising sound quality
- STURDY CONSTRUCTION: Solidly constructed of cross-laminated birch plywood in texture painting finish provides great protection
- VERSATILE APPLICATIONS: Two side-mounted M20 pole sockets support horizontal or vertical setups, while M10 rigging points facilitate easy installation for under-stage, in-wall, under-seating, and ceiling mount applications. This design is perfect for background music playback in clubs, bars, theaters, restaurants, churches, and more.
- Rockville SBG1128 12" 600 Watt Passive Pro DJ Subwoofer w/ MDF Cabinet and Pole Mount. 12 Pro audio woofer. 300 Watts RMS / 400 Watts Program / 600 Watts Peak. 2 high temperature aluminum voice coil
- 70 oz magnet woofer. Ported Enclosure for Improved Bass Response. Construction: High-Density, High-Quality Non Resonant Particleboard, Stapled, Bonded & Braced. Ergonomic Recessed Handles
- Molded Steel Grill. Aviation Grade Black Carpet. Pole Mount. Rubber Isolating Feet. Binding Post / Banana Plug Terminals (Negative/Positive). 1/4 Jack (In/Out). SpeakON (In/Out)
- All input/output connections are internally connected in parallel. Nominal Impedance: 8 Ohm. Sensitivity: 92dB @ 1w/1m. Frequency Response: 40hz - 700hz. Dimensions (W x D x H): 15.6 x 14.6 x 18.4
- Weight: 44 lbs
- CLEAR AUDIO PERFORMANCE:- Delivers 400W peak power (100W RMS) with a 2-way passive design, producing balanced sound across 55Hz–20kHz for music, vocals, and speeches.
- RUGGED AND RELIABLE BUILD:- Features a sturdy MDF enclosure and reinforced steel grille, designed to withstand frequent transport and heavy use at events or gigs.
- VERSATILE COMPATIBILITY:- 8-ohm impedance ensures seamless integration with most professional amplifiers, ideal for DJ setups, live bands, or small venue PA systems.
- PORTABLE FOR MOBILE DJS:- Lightweight at 12.8 lbs with ergonomic handles, making it easy to carry and set up for performances, parties, or presentations.
- OPTIMIZED FOR LIVE EVENTS:- High 90dB sensitivity and compact 17.1” x 11.3” x 10.2” design provide powerful sound in a space-saving package for small to medium venues.
- Unique four driver design combines form and function
- Dual slot ports minimize air turbulence
- Utilizes same high excursion drivers as the MK402 bookshelf speakers providing a matched, cohesive sound
- Manifold driver layout mitigates unwanted vibration and resonance
- Removable rubber feet allow the sub to be installed upright or laid flat
- (2) Rockville SBG1158 15" 800 Watt Passive Pro DJ Subwoofer w/ MDF Cabinet and Pole Mountable.
- 15” Pro audio woofer. 400 Watts RMS / 600 Watts Program / 800 Watts Peak. 3” High temperature aluminum voice coil.
- 70 oz magnet woofer. Ported Enclosure for Improved Bass Response. Construction: High-Density, High-Quality Non Resonant MDF wood - Stapled, Bonded & Braced. Ergonomic Recessed Handles.
- Molded Steel Grill. Aviation Grade Black Carpet. Pole Mountable. Rubber Isolating Feet. Binding Post / Banana Plug Terminals (Negative/Positive). 1/4" Jack (In/Out). SpeakON (In/Out). All input/output connections are internally connected in parallel. Nominal Impedance: 8 Ohm. Sensitivity: 94dB @ 1w/1m. Frequency Response: 20Hz - 500Hz.
- Dimensions (W x D x H): 18” x 17” x 20”. Weight: 44 lbs
Our Winner:
- DEEP BASS PERFORMANCE:- The Rockville SBG1158 features a 15-inch high-excursion woofer delivering 800W peak power for rich, room-filling bass ideal for DJ gigs, live concerts, and large venues.
- DURABLE MDF CONSTRUCTION:- Built with a rugged MDF cabinet, this subwoofer withstands heavy use while reducing resonance for clear sound, complete with a pole mount for easy speaker integration.
- VERSATILE CONNECTIVITY:- Dual XLR and 1/4-inch inputs ensure compatibility with powered mixers, amplifiers, and active speakers, making setup simple for professional audio applications.
- PRECISE AUDIO QUALITY:- A high-quality crossover filters frequencies (35Hz–200Hz) for clean, distortion-free bass, perfect for enhancing music at parties, clubs, or outdoor events.
- PORTABLE AND POWERFUL:- Weighing 44 lbs with ergonomic handles, this subwoofer balances portability and power, ideal for mobile DJs and event organizers needing reliable low-end sound.
Current offers for “Passive Pa Subwoofer”
You want to buy the best products in “Passive Pa Subwoofer”? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the category “Passive Pa Subwoofer”.