You are looking for products in the category of “”.
Table of Contents
Recommended products regarding the topic “Mic Stand Base Plate”
We have compared products in the section “Mic Stand Base Plate”. Here you can find the top 16 in the category “Mic Stand Base Plate”.
Mic Stand Base Plate – the most important at a glance
A microphone stand base plate is a musthave for any musician who wants to keep their microphone secure. There are many different types of mic stand base plates available on the market, so it is important to know the difference between them in order to choose the right one for your needs.
The most basic type of mic stand base plate is the round base plate. This is a simple design that is usually made of metal or plastic. It has a hole in the center for the microphone stand to fit through, and then the base plate rests on the ground. This type of base plate is not very stable, so it is not recommended for use with heavier microphones.
The next type of mic stand base plate is the triangular base plate. This design is more stable than the round base plate, because it has three points of contact with the ground. It is also usually made of metal or plastic, and has a hole in the center for the microphone stand to fit through.
The third type of mic stand base plate is the square base plate. This design is the most stable of all, because it has four points of contact with the ground. It is also usually made of metal or plastic, and has a hole in the center for the microphone stand to fit through.
So, which mic stand base plate is right for you? If you are using a heavy microphone, then the square base plate is the best option. If you are using a lighter microphone, then the triangular or round base plate will suffice.
Bestsellers in “Mic Stand Base Plate”
A list of bestsellers under the category “Mic Stand Base Plate” you can find here. Here you can see which products other users have bought especially often.
Bestseller No. 1
On Stage MS7201B Round Base Microphone Stand, Black
- Classic. Historically popular mic stand featuring a familiar classic-style, low-profile, solid, sand-cast base and a straight shaft, perfect for singers, vocalists, stand-up comedy, and speaking engagements.
- Sturdy. Heavy 10″ metal base delivers stability while maintaining portability. Rubber feet reduce vibrations and increase grip to prevent skids and keep the stand and mic safely in place.
- Adjustable. Heavy-duty clutch reliably adjusts the height 33″–60″ for precise mic placement and to accommodate various stage, studio, event, and venue applications.
- Compatible. The upper shaft accepts a wide range of standard mic clips, booms, and other mic accessories and secures them on its solid-metal 5/8″-27 threaded end with a tightening washer.
- Professional. Durable black finish resists chips and scratches to stay looking new while unobtrusively blending into any stage setup for a professional presentation.
Bestseller No. 2
OnStage TM08B Microphone Flange Mount, Black
- Ideal utility mount for installing 5/8"-27 mic clips, goosenecks, and accessories to flat surfaces
- 3mm shock pad reduces unwanted vibrations
- 2.3" diameter conserves space
- Black finish
Bestseller No. 3
Gravity MS 2 WP-Weight Plate for Round Base mic Stands (GMS2WP)
- Product Type :Instrument Parts And Accessories
- Package Dimensions :8.2" L X8.2" W X2.0" H
- Country Of Origin :China
- Package Weight :5.0Lbs
Bestseller No. 4
Gator Frameworks Desktop Microphone Stand with Round Weighted Base & Adjustable Height (GFW-MIC-0501)
- Desktop Microphone Stand with Round Weighted Base & Adjustable Height with Non-Slip, Vibration-Reducing Feet on Base
- Fits Most Popular Podcast Mics, Including Shure SM7B, Shure MV7, RODE Procaster, & RODE PodMic Models
- Great Mic-Placement Solution for Streaming, Podcasts, Broadcasts, Desktop Recording, Kick Drums, or Low-Profile Speaker Cabinets
- Standard Height Adjustment Twist Clutch with Min/Max Height: 9.5”/14.5” (241mm/368mm)
- Heavy Duty Steel Tubing with Compact 5.88”/149mm Round Cast-Iron Base
Bestseller No. 5
Shure by Gator Round Base Desktop Mic Stand with Standard Height-Adjustable Twist Clutch and 6" Base; (SH-DESKTOP1)
- Desktop Microphone Stand Designed to Hold Your Preferred Shure Mic for a Wide Variety of Applications: Broadcasts, Podcasts, Live Streams, & More
- Ergonomic Grip Twist Clutch Adjusts & Locks Height Between 10.5 - 16" (267 - 406mm)
- Non-Slip, 6" (152mm) Weighted Round Base with Vibration-Absorbing Rubber Gasket
- Fits Both US and Euro Mic Clips; Mic Threads: Standard US 5/8"-27 (Adapter) & Euro 3/8"-16 (Fixed)
- Total Weight: 2.4 lbs.
Bestseller No. 6
InnoGear Microphone Stand, Mic Stand Floor Universal Microphone Boom Arm with Carrying Bag Adjustable Mic Holder for Blue Yeti HyperX QuadCast SoloCast Snowball Fifine Shure SM7B and Other Mics
- Innovative One-Piece Design: The InnoGear microphone stand features a unique one-piece design that eliminates the need for sectional tubes, offering simplified height adjustments and enhanced stability. With no joints to wear out, you can count on long-lasting performance. Plus, the included carrying bag ensures easy portability and storage.
- Unmatched Stability and Durability: Built with a heavy-duty 3.5 lb steel base, this stand provides unmatched stability for your microphone. The 111 in² powder-coated base resists scratches and wear, maintaining its sleek look over time. Its compact design allows for easy storage, saving valuable space in your studio or home.
- Universal Compatibility: Compatible with FIFINE AM8, FIFINE A6V, HyperX QuadCast S, Audio-Technica AT2020, Razer Seiren X, Samson Q2U, and more, this stand includes a 3/8" to 5/8" adapter, a mic holder, and a mic clip. Whether for podcasting, live performances, or studio recordings, it adapts to your needs with ease.
- Versatile 2-Way Usage: The 360° adjustable gooseneck offers flexible positioning for precise microphone placement, ideal for performers and instrumentalists. Alternatively, you can remove the gooseneck to use the stand as a traditional floor stand, offering a more straightforward setup for speaking engagements or stationary recording sessions.
- Adjustable Height: With its easily adjustable height, the InnoGear microphone stand caters to a variety of performance settings and user preferences. The stand's height can be adjusted from 18.2" to 55" without the gooseneck and from 35" to 71.8" with it. This range accommodates both seated and standing positions, ensuring optimal microphone placement for any setting.
Bestseller No. 7
InnoGear Microphone Stand, Tripod Boom Arm Floor Mic Stand Height Adjustable Heavy Duty with Carrying Bag 2 Mic Clips 3/8" to 5/8" Adapter for Singing Podcast for Blue Yeti Shure SM58 SM48 Samson Q2U
- Adjustable Height & Solid: The height of the microphone stand with boom arm is adjustable from 28.1 inches to 89.8 inches by adjusting the knobs, perfect for people in all age groups. It features upgraded supporting structures for better load-bearing capacity, holding your microphone in position.
- Steady Tripod Stand: The high-quality thickened steel poles enhance the exceptional stability and durability of this mic stand. Compared to other lighter stands that are easy to tip over, our mic tripod stand is as heavy as 4.0lbs, serving indoor and outdoor use.
- Flexible & Detachable Boom Arm: The boom arm of the stand is adjustable from 16 inches to 30 inches in length and it can rotate 360° horizontally as well as up to 180° vertically. You can choose the best angle and length of performance by easily adjusting the knobs on the boom arm. Remove the boom arm and attach the mic clip, then you can also use it as a straight mic stand.
- Portable Carrying Bag: The package comes with a premium carrying bag and the floor mic tripod stand is easy to disassemble into several pieces which allows it to easily pack into the small carrying bag (19.5”×8.3” ) and fit anywhere, easy to transport and store.
- Wide Compatibility: Two different styles of mic clips in package are compatible with most types of microphones such as Shure SM58, Shure SM48, Shure PGA48, Samson Q2U, ATR2100x-USB, etc. The included metal 3/8” to 5/8” screw adapter is suitable for Blue Yeti, Snowball, Hyper X QuadCast, SoloCast, Shure SM7B, AT2020, Fifine AM8 and more.
Bestseller No. 8
InnoGear Mic Stand, Microphone Stand Floor Detachable Boom Mic Arm Stands with Weighted Round Base, Height Adjustable from 34" to 60" for Blue Yeti HyperX QuadCast Shure SM58 Samson Q2U Fifine K669B
- Versatile Height & Angle Adjustment: Adapt to any performance scenario with ease. The InnoGear mic stand features an adjustable height range from 34 inches to 60 inches, allowing you to customize the mic arm to your exact requirements. The user-friendly clutch ensures swift and precise height settings, while the 180° rotatable mic clip offers effortless angle adjustments. This ensures perfect microphone positioning every time, enhancing your performance with optimal sound capture.
- Heavy-duty Stability with Non-slip Base: Featuring a robust 4.5 lbs weighted round base with a 9.8-inch diameter, this microphone stand ensures solid and durable usage. The non-slip pads on the base provide extra stability, while a metal gasket between the base and stand prevents any unwanted wiggle, ensuring your microphone remains securely in place during performances.
- Enhanced Sturdy & Thickened Arm: Constructed with a thickened 1.5mm steel arm, significantly more durable than the standard 1mm arms found in other stands, this mic stand is built to hold even the heaviest microphones without deformation. Its superior stability prevents tipping, providing reliable support for your equipment.
- Detachable & Portable Design: This InnoGear boom mic stand can be quickly disassembled into three parts, making it highly portable and easy to set up. This feature is ideal for various settings, including stage performances, studio sessions, road shows, concerts, and outdoor events, offering unmatched convenience and versatility.
- Wide Applications: This upgraded mic stand fits for most types of microphones like Fifine K669B, Blue Snowball iCE, Blue Yeti, Audio-Technica AT2020, Audio-Technica AT2035, Samson Q2U, Razer Seiren X, Shure SM58, Shure PGA48, Shure SM7B and so on. Whatever your microphone of choice, this stand has you covered.
Bestseller No. 9
Round Base Microphone Stand, Bietrun Heavy Duty Adjustable Metal Mic Floor Stand for Singing/Church/Stage with 2 Universal Mic Clip, 3/8'' to 5/8''Adapter, for Shure SM7B/SM58/Samson Q2U/Podmic＆More
- 【Height & Angle Adjustable】The height of the microphone stand is adjustable from 24 inches to 67 inches. You can set up your desired height with ease by adjusting the clutch. The included mic clip is180°rotatable, making this mic stand more flexible and practical.
- 【Full Metal Boom and Heavy Duty Metal Round Base】The round base of the mic stand is made of solid die-cast metal, with a diameter of 10.24 inches and a weight of 5.64 lbs.●Comes with non-slip pads on the bottom of the base to further enhance stability and avoid any wiggle.●The microphone boom is made of high-quality alloy, which is very adamant.
- 【Wide Applications】Our upgraded straight mic stand comes with small and large 2 microphone clip Compatible with more microphone. such as: Shure SM58/Shure PGA48/ Samson Q2U/bietrun WXM02/WXM19/WXM21/JBL microphone etc. 3/8''to 5/8/''Adapter Compatible with blue yeti/HyperX SoloCast/HyperX QuadCast/BlueSnowball iCE/FIFINE Dynamic Microphone/Shure SM7B/Shure MV7X etc.With 2 clip-on cable holders to keep the cable neatly and orderly.
- 【Detachable & Portable Design】This microphone stand floor adopts with detachable design, which can be disassembled into two parts in seconds. Comes with exquisite and portable packaging, which provides great convenience for stage, studio, concerts, outdoor performances.
- 【Packing List】Round base metal Mic Stand*1, Mic Clips*2, Cable Clips*2, Portable Storage Box*1, User Manual*1.
Bestseller No. 10
Pyle Universal Compact Base Microphone Stand - 2.8 to 5 Ft Height Adjustable Heavy Duty Lightweight Studio Floor Standing Mic Holder w/ Standard 5/8" Mic Adapter , 2 Count ( Pack of 1)
- COMES IN PAIR: Pyle introduces two universal microphone stand in glossy black finish. An ideal floor mic stand for the musician that’s always on the go. Perfect mic holder positioning & optimal pickup for studio use and concert performances
- HEIGHT ADJUSTABLE: Allows you to adjust height from 2.8 to 5 feet. The heavy compact base microphone stand adjusts smoothly, raise/lower height adjustments depending on the user's height. Also features universal USA standard ⅝ inch screw-on threading
- METAL STAND BASE: The floorstanding microphone stand features a compact metal base that provides maximum stability & balance to prevent it from falling. The enlarged tubing is carefully taken into consideration for durability and structural support
- SLEEK BLACK FINISH: An ideal mic stand for musicians that’s always on the go, made ultra-light for easy transport. Features sleek black finish perfect for studio & concert performances. It is also built compactly to be both durable for long term use
- STEEL CONSTRUCTION: Made of strong lightweight steel construction ensuring maximum support for mics. The mic stand is perfect for both studio & stage use especially for concert performances. Includes 2 adjustable mount arm, 2 mic clip & 2 stand base
Our Winner:
Winner in comparison
OnStage TM08B Microphone Flange Mount, Black
- Ideal utility mount for installing 5/8"-27 mic clips, goosenecks, and accessories to flat surfaces
- 3mm shock pad reduces unwanted vibrations
- 2.3" diameter conserves space
- Black finish
Current offers for “Mic Stand Base Plate”
You want to buy the best products in “Mic Stand Base Plate”? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the category “Mic Stand Base Plate”.
Bestseller No. 3
Bestseller No. 7
