1. Homepage
  2. »
  3. Product Guide
  4. »
  5. Live Studio
  6. »
  7. Amp 500 Watts – The 16 best products compared

Amp 500 Watts – The 16 best products compared

Amp 500 Watts – The 16 best products compared

You are looking for products in the category of “”.

Recommended products regarding the topic “Amp 500 Watts”

We have compared products in the section “Amp 500 Watts”. Here you can find the top 16 in the category “Amp 500 Watts”.

Amp 500 Watts – the most important at a glance

AMPS:

There are a variety of amps with different wattage that are available in the market. The most common types of amps include:

Monoblock: A monoblock amp is a singlechannel amplifier that is typically used to power subwoofers.

2Channel: A 2channel amp can power two speakers or one subwoofer and one speaker.

4Channel: A 4channel amp can power four speakers or two subwoofers and two speakers.

5Channel: A 5channel amp is powerful enough to operate a subwoofer, two front speakers, and two rear speakers.

The wattage of an amplifier refers to the amount of power that the amp can deliver to the speakers. The higher the wattage, the louder the sound that can be produced. However, it is important to note that the wattage rating is not necessarily indicative of the quality of the sound.

There are a few things that you should take into consideration when choosing an amplifier, such as:

The number of channels that you need

The wattage that you need

The type of speakers that you will be using

The size of your car

Your budget

Now that you know the basics of car amplifiers, let’s take a look at the different types of amplifiers that are available on the market.

Monoblock Amplifiers:

A monoblock amplifier is a singlechannel amplifier that is typically used to power subwoofers. Monoblock amps are available in a variety of wattages, so you can choose one that will deliver the amount of power that you need.

2Channel Amplifiers:

A 2channel amplifier can power two speakers or one subwoofer and one speaker. 2channel amps are available in a variety of wattages, so you can choose one that will deliver the amount of power that you need.

4Channel Amplifiers:

A 4channel amplifier can power four speakers or two subwoofers and two speakers. 4channel amps are available in a variety of wattages, so you can choose one that will deliver the amount of power that you need.

5Channel Amplifiers:

A 5channel amplifier is powerful enough to operate a subwoofer, two front speakers, and two rear speakers. 5channel amps are available in a variety of wattages, so you can choose one that will deliver the amount of power that you need.

Bestsellers in “Amp 500 Watts”

A list of bestsellers under the category “Amp 500 Watts” you can find here. Here you can see which products other users have bought especially often.

Bestseller No. 1
Skar Audio SK-M5001D Compact Monoblock Class D MOSFET Car Amplifier, 500W
  • Ultra Compact MOSFET Monoblock Class D Car Amplifier
  • RMS power @ 1 Ohm: 500 Watts x 1 Channel (14.4v)
  • Frequency Response: 15Hz - 270Hz
  • Hi-Level Input Connection: Yes | Signal-to-Noise Ratio (Sensitivity): 85dB
  • 8 Gauge Power and Ground Input Terminals
Bestseller No. 2
LEIGESAUDIO 500 Watts MonoBlock Amplifier, Class D, 1 Ohm Stable Subwoofer Amplifiers for Car Audio Speakers
  • POWER - MAX Power 1Ω:1x2200w @ 1ohm,MAX Power 2Ω:1x1400w @ 2ohm;RMS Power:1x900w @ 1ohm, RMS Power:1x600w @ 2ohm. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
  • CLASS D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it's needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
  • 1 Ohm STABLE - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • VARIABLE SUBSONIC FILTER WITH LOW-PASS CROSSOVER - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion. Reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • WARRANTY - As long as you purchase through Amazon.com, LEIGESAUDIO provide a comprehensive 3-year VIP online reseller warranty. We strongly encourage professional installation methods to ensure excellent performance and safe functions of this product.
Bestseller No. 3
PIONEER 500W Mono Class D AMP 13in. x 10.75in. x 4.5in.
  • 300W RMS x 1 @ 4Ω
  • 500W RMS x 1 @ 2ω
  • 800W RMS x 1 @ 1ω
  • Free rasp: 10hz–240khz
  • Signal-to-noise ratio: 100dB
Bestseller No. 4
Skar Audio RP-75.4AB 500 Watt Full-Range Class A/B 4 Channel Car Amplifier
  • 500-Watt MOSFET 4-Channel Class A/B Power Car Amplifier
  • RMS Power at 2 Ohms: 125 Watts x 4 Channels
  • RMS Power at 4 Ohms: 75 Watts x 4 Channel
  • User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch (0, +6, +12 dB)
  • 4 Way Protection Circuitry | Frequency Response: 20 Hz - 20,000 Hz
  • Signal to Noise Ratio: 105 dB
Bestseller No. 5
Rockville dB12 2000 Watt Peak/500w RMS Mono 2 Ohm Amplifier Car Amp
  • Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp
  • Features of dB12: Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  • 2 Ohm: 500 Watts x 1 Channel <1% THD+N. - 4 Ohm: 300 Watts x 1 Channel <1% THD+N
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 2000 Watts x 1 Channel. - 4 Ohm: 1200 Watts x 1 Channel
Bestseller No. 6
Timpano Compact 4 Channel Amplifier Car Audio 500 Watt, 4 x 125 Watts at 2 Ohms, Mini Stereo 12 volts Full Range Class D Amp, Bridgeable Amplifier 4 Channels TPT-500.4
  • COMPACT DESIGN: Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 3.93″ depth x 5.02″ width x 2″ height
  • POWER: This amplifier is designed to run your stereo system with the power it needs to perform! 500 Watts maximum dynamic RMS power output of 4x 125 Watts at 2 Ohms per channel. Its high efficiency rate of 87% provides more power with less battery consumption.
  • BRIDGEABLE: Double the power output to your speakers by bridging two channels. Minimum impedance of 4 Ohms per bridged channel at output power of 2 x 225 Watts RMS
  • TECHNOLOGY: A smart electronic 2-way protection circuit protects the amp if it gets too hot or if speakers fail causing a short! Focusing in sound quality, a full range response of 10 to 24,000Hz was used to give the best sound reproduction on this tiny amplifier.
  • FEATURES: Heavy Duty 10 Gauge power and speaker wire Inputs. Built-in crossover filters for easy tuning! Choose between a fixed HPF at 90Hz or LPF at 90Hz + 45Hz Bass Boost or just turn it FLAT and use your external crossover or DSP settings. It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.
Bestseller No. 7
Belva BXA5002 500W Peak BX-Series 2-Ohm Stable Class-A/B 2-Channel Car Audio MOSFET Amplifier with Remote Subwoofer Level Control
  • 📈Max Power Rating: 500 Watts
  • 📈Power Rating: 4 ohms: 125 watts x 2 | 2 ohms: 250 watts x 2
  • ✅Extreme Efficiency: As a Class A/B amplifier, this amp combines the high efficiency of a class A amplifier and lower distortion found in class B amplifiers. The three-way protection circuitry against thermal, overload, and speaker shortages, increases the longevity of the entire system. Combined with the MOSFET transistor, the BX series amps are one of the most efficient amplifiers in its class.
  • 🎛User Control: Belva amplifiers provide a world-class user control experience. The 2-channel and 4-channel models feature a high pass, low pass, and full range filter that allow you to accurately tune your system for optimal sound quality and performance.
  • 🧩One Size Fits All: All BX-Series amplifiers feature both high-level and low-level inputs. High-level (speaker level) inputs accept the signal from the speakers, while low-level (RCA) inputs accept the signal from the pre-amp outputs of the source unit.
Bestseller No. 8
NVX NDA101 1000W MAX Power (500W) RMS N-Series Class-D 1-Ohm Stable Monoblock Subwoofer Amplifier with Included Bass Remote Knob
  • 𝗖𝗹𝗮𝘀𝘀 𝗗 𝗠𝗼𝗻𝗼𝗯𝗹𝗼𝗰𝗸 𝗔𝗺𝗽𝗹𝗶𝗳𝗶𝗲𝗿: Boasts a maximum power of 1000W and an RMS of 500W at 1 Ohm. Notably efficient due to significantly reduced power loss. Excess energy is stored, not wasted as heat.
  • 𝟭 𝗢𝗵𝗺 𝗦𝘁𝗮𝗯𝗶𝗹𝗶𝘁𝘆: Designed to continuously power 1 Ohm loads without overheating issues. Ideal for powering subwoofers requiring heavy power loads for optimal performance.
  • 𝗠𝗢𝗦𝗙𝗘𝗧 𝗣𝗼𝘄𝗲𝗿 𝗦𝘂𝗽𝗽𝗹𝘆: Incorporates an electrical switch (MOSFET) to control electrical current flow. Ensures precise output voltage and current control by eliminating output current sensing loss and secondary feedback circuitry.
  • 𝗩𝗮𝗿𝗶𝗮𝗯𝗹𝗲 𝗦𝘂𝗯𝘀𝗼𝗻𝗶𝗰 𝗙𝗶𝗹𝘁𝗲𝗿: Prevents subwoofer bottoming out by filtering out frequencies below the subwoofer's specified lower frequency limits, enabling maximum safe driver excursion.
  • 𝗩𝗮𝗿𝗶𝗮𝗯𝗹𝗲 𝗟𝗼𝘄-𝗣𝗮𝘀𝘀 𝗖𝗿𝗼𝘀𝘀𝗼𝘃𝗲𝗿: Tailors subwoofer sound reproduction to specific low-range frequencies, allowing for precise bass frequency customization.
Bestseller No. 9
Belva BB200ABv2 500 Watt Max Class A/B Monoblock Car Amplifier
  • Class-A/B 2-Ohm Stable Monoblock Amplifier
  • High level/speaker level inputs
  • One pair of preamp outputs
  • Remote bass knob included
Bestseller No. 10
Rockford Fosgate R2-500X1 Prime 500-Watt Mono Amplifier
  • The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
  • Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)
  • Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
  • Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
  • Famous Rockford Fosgate build quality with a full 1-year warranty

Our Winner:

Winner in comparison
Skar Audio SK-M5001D Compact Monoblock Class D MOSFET Car Amplifier, 500W
  • Ultra Compact MOSFET Monoblock Class D Car Amplifier
  • RMS power @ 1 Ohm: 500 Watts x 1 Channel (14.4v)
  • Frequency Response: 15Hz - 270Hz
  • Hi-Level Input Connection: Yes | Signal-to-Noise Ratio (Sensitivity): 85dB
  • 8 Gauge Power and Ground Input Terminals

Current offers for “Amp 500 Watts”

You want to buy the best products in “Amp 500 Watts”? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the category “Amp 500 Watts”.

Related articles