You are looking for products in the category of “”.
Table of Contents
Recommended products regarding the topic “Build A Guitar Kits”
We have compared products in the section “Build A Guitar Kits”. Here you can find the top 16 in the category “Build A Guitar Kits”.
Build A Guitar Kits – the most important at a glance
A guitar kit is a great way to get everything you need to build your own guitar. There are a few things to consider when choosing a guitar kit, such as the type of wood, the neck, the bridge, the pickups, and the hardware.
The type of wood is the most important factor in the sound of the guitar. The most common woods used for guitar construction are mahogany, alder, and maple. Mahogany is a warmsounding wood that is often used for acoustic guitars. Alder is a brightersounding wood that is often used for electric guitars. Maple is a very brightsounding wood that is often used for both acoustic and electric guitars.
The neck is the part of the guitar that the strings are attached to. The most common type of neck is the bolton neck, which is attached to the body with bolts. The setin neck is glued to the body and is more difficult to repair if it breaks. The neck joint is the area where the neck meets the body. The most common neck joint is the dovetail joint, which is very strong and provides good sustain.
The bridge is the part of the guitar that the strings are held in place. The most common type of bridge is the fixed bridge, which is glued or screwed to the body. The floating bridge is not attached to the body and is held in place by the tension of the strings. The tremolo bridge is a type of floating bridge that allows the player to create a vibrato effect by moving the bridge up and down.
Pickups are the part of the guitar that converts the string vibrations into electrical signals. The most common type of pickup is the magnetic pickup, which uses magnets to generate the signal. The piezo pickup uses crystals to generate the signal and is often used in acoustic guitars. The transducer pickup uses a microphone to generate the signal and is often used in amplified acoustic guitars.
The hardware is the part of the guitar that includes the tuning machines, the strap buttons, the jack, and the truss rod. The tuning machines keep the strings in tune. The strap buttons are used to attach a strap to the guitar. The jack is used to plug the guitar into an amplifier. The truss rod is used to adjust the tension of the neck.
Bestsellers in “Build A Guitar Kits”
A list of bestsellers under the category “Build A Guitar Kits” you can find here. Here you can see which products other users have bought especially often.
- Bolt-on Neck ST style electric guitar DIY Kits,Solid mahogany body and maple neck.
- Beautiful mahogany body has been deeply polished and sprayed with the bottom varnish, which reduces the work of the buyer for body painting.
- All cavity drilled for pickups and control knbobs.
- Ebony fingerboard with 6mm pearl dot inlay.
- 1 side Machine heads for a shaped headstock.
- All the wire cable and screws are included in it.
- 25.5" Scale and Maple neck in 21 frets.
- The thickened single side can be pasted with copper foil paper, and the noise can be effectively reduced by sticking it to the positions such as the wires compartment and the pickup groove.
- DIY electric guitar kits
- okoume wood Body, maple neck & composite ebony fingerboard,
- White pickguard and all electronic parts
- it is easy to build your own TL electric guitar.We have included instructions with the product to better assist you with this project. If your instructions is lost, please let us know and we will send it to you in PDF format.
- 【UNIQUE DESIGN】This DIY guitar has a novel flame shape body that looks like a burning fire. The superior shell inlay on the ebony fretboard is eye-catching and makes this guitar even more distinctive. It could be a surprising gift for music lovers.
- 【PREMIUM MATERIAL】This DIY guitar kit comes with a high tenacity mahogany body and maple neck for a better sound transfer environment. The bright and good-quality Chrome color control knob and hardware create a pretty appearance.
- 【EASY TO INSTALL】Our DIY guitar comes pre-sanded and drilled and no welding is required, which greatly reduces the difficulty of building your guitar. Not only come with instructions but also an assembly video with all the detailed steps to make your installation easier.
- 【CUSTOMISE YOUR OWN GUITAR】This diy electric guitar comes deeply polished but completely unfinished so you can paint, stain, varnish or finish your guitar to any design you wish. If your kid love guitar, it might also be a good gift to inspire the children to create.
- 【EVERT THIGHT YOU NEED ALL INCLUDE】Comes with all the necessary parts so you don't have to buy any extra. You just need to follow the assembly steps we provide to complete the installation easily. If have any problem, please feel free to contact us.
- electric guitar kits . okoume wood body
- comes with unpolished okoume body, maple neck &composite ebony fingerboard
- with White pickguard , all parts and all electronic components
- it is easy to build your own electric guitar.We have included instructions with the product to better assist you with this project. If your instructions is lost, please let us know and we will send it to you in PDF format.
- DIY kits for electric guitar Flame Mahogany veener top Hollow okoume wood body, maple neck & composite ebony fingerboard
- curved top with mahogany veneer, 22 frets, inlay on fingerboard, 6 string , 3 way swiches
- butter-colored pick guard, two humbucks & all electric parts included
- it is easy to build your own LP electric guitar
- No-Fail Guarantee: From Opening The Box To Buffing The Finish, We're Ready To Answer Any Question.
- Mahogany Body With Maple Top And Premium Flame Maple Veneer
- Neck Pocket, Pickup Cavities And Bridge Holes Are All Drilled And Routed For The Perfect Placement And Fit
- Shaped Mahogany Neck Has A 2-way Truss Rod Installed
- Bound Indian Laurel Fingerboard Comes Pre-installed With Frets And Traditional Crown Pearloid Inlays
- DIY kits for electric guitar okoume wood body, maple neck & composite ebony fingerboard
- curved top with mahogany veneer, 22 frets, inlay on fingerboard, 6 string , 3 way swiches
- butter-colored pick guard, two humbucks & all electric parts included
- it is easy to build your own LP electric guitar。We have included instructions with the product to better assist you with this project. If your instructions is lost, please let us know and we will send it to you in PDF format.
- We offer this Ja DIY guitar kit includes pickups,bridge, strings,hardware and all other components needed to build a professional grade electric guitar.Easy to follow instructions make installing guitar kits easy.
- The body and neck of the DIY guitar kit are made from carefully selected mahogany and are baked. This not only ensures an even colour of the wood, but also achieves stability of the wood, avoiding semi-finished guitars that may warp because they are not protected by the baked finish.
- Guitar fingerboards are available in two options: Rosewood and Maple.The maple fingerboard has a bright sound with a short sustain, which gives a nice clean sound, while the rosewood fingerboard has a fuller, warmer sound, which is better suited for distorted tones.
- Classic S-S pickups have a bright tone with good dynamic feedback for a more penetrating sound, and a three-way switch for tonal versatility, allowing you to experiment with more styles on your guitar.
- The electric guitar uses a classic vintage triple saddle bridge, which makes it easier to adjust the tone of your electric guitar while ensuring stability.
- EVERYTHING YOU NEED IN ONE BOX: This great value DIY guitar kit has all the necessary parts and hardware for a beginner level build. Without any of the hassle and expense of sourcing all of the parts, everything you need is in one box!
- HIGH QUALITY COMPONENTS: This build your own guitar kit includes basswood body, 6 string hard maple neck with DYED poplar fingerboard, single-coil pickups, vintage tremolo and die-cast chrome machine heads.
- CUSTOMISE TO YOUR OWN STYLE: The body comes cut and sanded, but completely unfinished, so you can paint, stain, varnish or finish your guitar to any design you wish. The maple neck also comes with an unfinished headstock, so you can mark up it, be it something completely original, or a tribute to an iconic instrument.
- SUSTAINABLE TONE WOODS: The range of Fistrock DIY guitar kits features sustainable wood that meets the needs of the evolving world. Composed of DYED poplar, the dense and natural grain of the updated fingerboard give improved tone and volume.
- FULL INSTRUCTIONS PROVIDED, SOME EXTRA TOOLS REQUIRED: Some tools may will be needed, such as a soldering iron and a screwdriver. After purchase, if you need the instruction, please send email to us, we will send it to you via Amazon message, or you can also watch the video at the end of the picture.
- DIY electric guitar kits
- okoume wood Body, maple neck & composite ebony fingerboard,
- white pickguard and all electronic parts
- it is easy to build your own telecaster electric guitar.We have included instructions with the product to better assist you with this project. If your instructions is lost, please let us know and we will send it to you in PDF format.
Our Winner:
- Bolt-on Neck ST style electric guitar DIY Kits,Solid mahogany body and maple neck.
- Beautiful mahogany body has been deeply polished and sprayed with the bottom varnish, which reduces the work of the buyer for body painting.
- All cavity drilled for pickups and control knbobs.
- Ebony fingerboard with 6mm pearl dot inlay.
- 1 side Machine heads for a shaped headstock.
- All the wire cable and screws are included in it.
- 25.5" Scale and Maple neck in 21 frets.
- The thickened single side can be pasted with copper foil paper, and the noise can be effectively reduced by sticking it to the positions such as the wires compartment and the pickup groove.
Current offers for “Build A Guitar Kits”
You want to buy the best products in “Build A Guitar Kits”? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the category “Build A Guitar Kits”.