You are looking for products in the category of “”.
Table of Contents
Recommended products regarding the topic “Dmx Power”
We have compared products in the section “Dmx Power”. Here you can find the top 16 in the category “Dmx Power”.
Dmx Power – the most important at a glance
What are DMX power products?
DMX power products provide a way to control DMXpowered lights and devices. DMX is a popular protocol for controlling stage lighting and effects. DMX power products come in a variety of shapes and sizes, from standalone controllers to powerful software packages.
What are the benefits of using DMX power products?
DMX power products offer a number of benefits over other lighting control solutions. DMX is a widelysupported protocol, so there is a wide range of compatible devices and fixtures. DMX power products also offer a high degree of control and flexibility, allowing you to create complex lighting effects.
What are the different types of DMX power products?
There are a few different types of DMX power products on the market. Standalone controllers are selfcontained units that allow you to control a limited number of DMXpowered lights. These controllers are typically very simple to use and are a good solution for basic lighting needs.
Software packages offer a much higher degree of control, but can be more difficult to use. These packages typically allow you to control an unlimited number of DMXpowered lights and can create very complex lighting effects. Some software packages also include features such as automated lighting programs, scheduling, and remote control.
What are the similarities and differences between the various DMX power products?
The various DMX power products on the market share a few common features. Most products allow you to control DMXpowered lights and fixtures, and many products offer a high degree of control and flexibility.
However, there are a few key differences between the products. Standalone controllers are typically very simple to use, while software packages can be more complex. Software packages also offer a wider range of features, such as automated lighting programs and remote control.
Bestsellers in “Dmx Power”
A list of bestsellers under the category “Dmx Power” you can find here. Here you can see which products other users have bought especially often.
- 1.AC Powerconnector Cable speaker Cable for LED Screen Beam Moving Head Light Power in and out Power cables;
- 2.Length:3Ft ; ( 3/6/10/25 Ft all kinds of meters cables can be made)
- 3.Material cable: Shielded cable RVVP + Copper
- 4.Power cable size: 14 AWG / 3 x 2.08mm （square）
- 5.PowerCon Power-In NAC3FCA PowerCon Power-Out NAC3FCB
- Input, Output Powercon-Compatible Connectors, Fast and easy twist lock latching system
- DMX 3-Pin XLR Male and Female Connectors
- 16 AWG bare copper conductors, SJT-rated jacket Power Wire
- Color Coded Plugs, Blue for Power In, Grey for Power Out
- UPC : 194732007502, Length : 10 feet
- 4-Channel DMX-512 dimmer/relay pack
- Each Channel can be set as either dimmer or relay and can be set to any DMX address
- Variable electronic dimmer (0-100%)
- Adjustable speed control and dimming with or without DMX
- 1-Year limited warranty
- Female version 2.4G wireless DMX512 Receiver 126 channels jumping frequency automatically, high anti-jamming ability.
- 7 groups ID code settable,User can use 7 groups individual wireless net without any interfere each other in the same place.
- Input voltage: 5VDC 500mA MIN Communication distance: 400M (visible distance)
- Work frequency section: 2.4G ISM,126 channels.
- Service:3 years
- √ DMX-4+4 Splitter is a DMX512 distribution amplifier it is specially designed for connection of DMX receivers(Dimmers, Color changers,moving light,Etc)in a star configuration
- √ Multi-Interface:1 Powercon Input To 4 outouts, MAX 16A and 1 DMX Input To 4DMX Outputs, Power LED indicator, overcurrent protection, Many interfaces meet the needs of multiple lines
- √ The multiple output optically isolated DMX512 distribution amplifiers have become necessary in many DMX512 systems
- √ DMX-4+4 provide total electrical ground isolation between different branches of the star. This greatly decreases problems with ground loops
- √ DMX-4+4 amplifies and refits the DMX signal,that it makes the DMX data transmission more reliable
- Suitable for outdoor waterproof stage light, for power and DMX signal connection between light and light, extending the power cable and DMX signal cable distance between light and light
- The power cord and signal cable are both 2 meter (6.6 feet) long, Male and female waterproof design plugs at both ends, used directly after purchase, If you want to be longer, you can buy more cable use in series.
- Your stage lighting must be equipped with the same type of waterproof design connector plug, otherwise you can not use it
- Inside both are three copper core wires, each with multiple copper wires, the wire is soft, foldable, will not break, Wrapped with insulating plastic on the outside, no short circuit, never hurt people, and the service life can be as long as 10 years.
- Stage light interval extension power line and DMX signal line, mainly used for outdoor waterproof led par lights or waterproof wall washers which with hand-to-hand waterproof connection cable, There are waterproof spiral caps on the power cord and signal cable. When you connect, tighten the lid to prevent rain from entering.
- Cambo 6-pin design(3 for DMX and ther other 3 for power transmission) extension cable for BETOPPER par lights(support daisy-chain power and XLR)
- 10 FT XLR & power cable daisy-chain BETOPPER 6-pin design stage par light in master-slave mode
- Latest design wireless DMX512 receiver have a built-in battery, don't need power adapter any more when it works. 2 hours full charging time, can lasts about 8 hours of work， Users also can use the product while charging. (Transmitter does not contain charging function)
- Work frequency section: 2.4G ISM ; No time delay when signal data is transmitting, signal data is real time and reliably.
- DMX512 wireless transmitter transmits standard DMX512 protocol data (generated by console) by wireless way.
- Metal Black Shell. 7 groups ID code settable, user can use 7 groups individual wireless net without any interfere each other in the same place.
- Service: 3 years.
- Output current: 8A/CH (Note: total current can not over 24A)
- Maximum power load: 288W (12V),567W(24V)
- Supply voltage: DC12-24V
- Input Signal: DMX512/1990
- Output DMX : 3 channels
- Receives standard DMX 512/1990 digital control signal and transformrd it into PWM signal to adjust LED Lights;
- Input Automatically adapt to DC12V-24V,And Output Max power load:240W(12V);480W (24V)
- The DMX address can be set through dip switch,And You could connect with DMX digital console to achieve RGB dimming functions;
- Easy Use for 15 modes and 30 steps speeds for your options;signal interfaces XLR-3 and RJ45;
- High Power Output Max 20A For 5A Each Channel,Use for LED strip,LED module,LED light.
Our Winner:
- 1.AC Powerconnector Cable speaker Cable for LED Screen Beam Moving Head Light Power in and out Power cables;
- 2.Length:3Ft ; ( 3/6/10/25 Ft all kinds of meters cables can be made)
- 3.Material cable: Shielded cable RVVP + Copper
- 4.Power cable size: 14 AWG / 3 x 2.08mm （square）
- 5.PowerCon Power-In NAC3FCA PowerCon Power-Out NAC3FCB
Current offers for “Dmx Power”
You want to buy the best products in “Dmx Power”? In this bestseller list you will find new offers every day. Here you will find a large selection of current products in the category “Dmx Power”.
No products found.